Specializing in laser, CNC equipment solutions
Corporate News
Your current location:主页 > en > News Center > Corporate News >

Technical methods density plywood laser engraving

Article Source:http://www.shcmlaser.com Release Time:2015-12-23 09:51 Views:
Normal density plywood
This type of MDF that we used to do the kind of wood pallets signs lining. Material is high density, surface mount with a thin wood. The laser can be performed on these materials carving, but carved out of uniform and black color pattern, generally colored. Under normal circumstances you can through proper design, color plates of 0.5mm mosaic to get better results.
Laser dedicated density plywood
Some MDF is specially designed for use in laser engraving, carving out a pattern of uniform color, not colored also have a good effect.
clean
After carving MDF can use a damp cloth to clean the surface.
Colouring
You can use acrylic paints or alkyd. When carving color graphics can be set to 60% gray, the bottom surface of carving some pitting, to improve color adhesion.

Recommended Products
switchboard:021-61558010 fax:021-59556319 QQ:1158518808 Sales calls:021-61558300
Micro-channel public number:shcmlaser-cnc fax:021-59556319 Company email:sales@jxyttc.com
All rights reserved:Shang Hai Chuang Ming Laser equipment plant Technical Support:Yong Yan Technology